RCA 15491880 - Manual (Page 16)

Connections &. Setup
Plug in the TV
Plug the end of the pou et eord into the wall outlet. Match tlie wide blade of the
plug \\-ith the wide slot in the outlet. Insert tlie plug completely into
the outlet.
Use the arrow buttons and the OK
button to rnove through the menu
system.
Put Batteries in the Remote
1. Remove the battery coiiipartment cover on the remote.
2. Insert new batteries. .Match the pcdarities {+ and d ttn the batterie.s with the
diagram on the remote.
3. Ptit the batteiy compartment cover back on the remote.
How to Use the Remote Control to
Complete the Interactive Setup
The technical term is Navigation' - how you move through the on-screen
menus. The theory is the same throughout the menu screens: highlight your
choice and select it.
To highlight a menu item, press the arrow buttons on the remote to highlight
one of the items listed on the screen. Use the up or down arrow button to move
up or down. Use the riglit or left arrow button to move right or left.
To select the item that you’ve highlighted, press OK.
Note: Highlighted means that the menu item stands out from
other menu items on the list (appears darker, brighter, or a .
different color).
Turn on the TV
Press the TV button on the remote control or the POWER button on the TV (the
first screen of the Interactive Setup appears). The menu screens “time out” after
a period of time if you don’t make a .selection. The tips in this section tell you
how to access the Setup menu screens manually.
Note: Pressing the TV button not only turns on the TV, but puts the
remote into 7V mode. "TV mode” means that the buttons on the remote
control operate the TV's functions.
14
Chapter 1