Taking pictures of a white beach or snow scene, Taking pictures of a subject against backiight, Additional shooting tips and information – Olympus 700 User Manual
Page 63: Recording pictures to the internal memory, Using a card (optional), Shooting tips and information
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Taking pictures of a white beach or snow scene
• Take pictures with in SCN mode. Suitable for taking pictures on a sunny
day at the beach or in the snow.
IGT “SCN Shoot pictures by selecting a scene according to the situation” (P. 9)
• Often, bright subjects (such as snow) turn out darker than their natural coiors.
Adjust [12] toward [+[ to make these subjects closer to their real shades.
Conversely, when you are shooting dark subjects, it can be effective to adjust
toward the [-]. Sometimes, using the flash may not produce the brightness
(exposure) that was intended.
№ "AI2 button Changing picture brightness" (P. 13)
Taking pictures of a subject against backiight
• With [ESP/I » 11 set to [I » II. the picture can be taken based on the brightness
at the center of the monitor without being affected by the light in the
background.
CS”" "ESP/fTI Changing the area for measuring the brightness of a subject” (P. 22)
• Set the flash to [^] to activate fill-in-flash. You can shoot a subject against
backiight without the face of the subject appearing dark. [ ^ ] is effective for
shooting against backlight and under fluorescent and other artificial lightening.
C3”’ button Flash shooting” (P. 13)
Additional shooting tips and information
O
I Increasing the number of pictures that can be taken
There are two ways to record the pictures you take with this camera.
Recording pictures to the internal memory
• Pictures are recorded to the internal memory, and when the number of
storable still pictures reaches 0, you must connect the camera to a computer
to download the pictures, and then erase the pictures from the internal
memory.
Using a card (optional)
• Pictures are recorded to the card when inserted in the camera. When the card
is full, you download the pictures to a computer, and then either erase the
pictures from the card or use a new card.
• Pictures are not recorded to the internal memory when a card is inserted in
the camera. Pictures in the internal memory can be copied to the card using
the [BACKUP] function.
CS’ “BACKUP Copying pictures in the interna! memory to the card” (P. 33)
“The card” (P. 77)
o
c
O'
(B
63