Toshiba MA-132 SERIES - Manual (Page 49)

REPLACING THE INK ROLL
When the receipt and journal paper print
becomes too light to read, replace the
Ink Roll in the iollowing manner.
1) Turn the Control Lock to the "LOCK"
position and remove the Ink Rol 1 Case
"A" part upwards together with the Ink
Roll. (Fig.10)
2) To install the new Ink Roll, turn the
Ink Holder "B" about 1 cm to the front
and set the new roll in position.
REPLENISHING INK TO THE STORE MESSAGE STAMP
When the store message is printed too
lightly, replenish ink in the following
manner. (Fig,11)
1) Pull the section "A" upwards and remove
the stamp with the case.
2) Apply ink to the replenishment pad at
the back of the store message stamp.
The amount of refilling should be
adjusted according to the density of
the printed message, but the limit of
2 cc should not be exceeded. (The
supplied ink bottle contains 5 cc of
ink).
- 45 -