Physical description – Crestron electronic CLW-SW1/4RF User Manual
Page 8

infiNET™ Switches
Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF
CLW-SW1/4RF, CLW-SWS1/4RF, & CLW-SLVS1RF Specifications (continued)
SPECIFICATION DETAILS
Dimensions and Weight 
(continued) 
-SLVS1RF: 
 Height: 4.13 in (10.48 cm) 
 Width: 1.75 in (4.45 cm) 
 Depth: 1.88 in (4.77 cm) 
 Weight: 3.6 oz (0.50 kg) 
1.
The range is dependent on its placement and the building in which it is used. The construction of the 
building, obstructions, and RF interference from other devices are factors determining the effective 
range of the unit. 
2.
The latest software versions can be obtained from the Crestron website. Refer to the NOTE 
following these footnotes. 
3.
Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product 
Catalog for a complete list of 2-Series control systems. 
4.
Refer to Derating Charts for Multigang Installations in the latest version of the infiNET Switches 
Installation Guide (Doc. 6293) which is available from the Crestron website. 
5.
VA ratings are for input power to the transformer. If you do not know the input power requirement 
of the transformer, use the bulb’s wattage rating to determine proper rating. 
NOTE: Crestron software and any files on the website are for Authorized Crestron 
dealers and Crestron Authorized Independent Programmers (CAIP) only. New users 
may be required to register to obtain access to certain areas of the site (including the 
FTP site). 
Physical Description
The -SW1RF and -SWS1RF have a light emitting diode (LED) with adjustable 
brightness (via Crestron programming software), a rocker button, and a three-
position mode selection switch as shown in the following diagrams. The button may 
be pushed at the top or bottom to perform certain functions. Pushing the button in the 
middle does not do anything. The function of the pushbutton is determined by the 
position of the mode selection switch. For more information, refer to “Operation” on 
page 10. 
Parts of CLW-SW1RF and -SWS1RF
Button
Mode Selection Switch
RUN
SET
OFF
4
• infiNET Switches: Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF
Operations Guide - DOC. 6397A
