Crestron electronic CLW-SW1/4RF - Manual (Page 10)

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF
Physical View of CLW-SW4RF/-SWS4RF (Clockwise from Top; Top, Side, and Front)
RUN SET OFF
1.75 in
(4.45 cm)
2.38 in
(6.03 cm)
3.28 in
(8.32 cm)
3.81 in
(9.68 cm)
4.13 in
(10.48 cm)
1.88 in
(4.77 cm)
2.70 in
(6.86 cm)
1.50 in
(3.81 cm)
The -SLVS1RF is similar in appearance to the -SW1RF and -SWS1RF but does not
have the three-position mode selection switch. The brightness of the LED on the
-SLVS1RF is not programmable.
Physical View of CLW-SLVS1RF (Clockwise from Top; Top, Side, and Front)
1.75 in
(4.45 cm)
3.81 in
(9.68 cm)
4.13 in
(10.48 cm)
3.28 in
(8.32 cm)
1.88 in
(4.77 cm)
2.70 in
(6.86 cm)
1.50 in
(3.81 cm)
The -SW1RF, -SW4RF, -SWS1RF, -SWS4RF, and -SLVS1RF mount in a standard
wallbox and are covered using a decorative faceplate (not included). All line voltage
connections are made at the rear of the switch.
6 • infiNET Switches: Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF Operations Guide - DOC. 6397A