Toshiba IK-542XD User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
© DC IN/SYNC terminal (For detail, refer to page 10.)
Used when performing the external sync and trigger function. Also used for power supply
and video output.
SELECT switch
Switches the camera video output system.
SELECT
Video output system
1/30N
1/30 second non-interlace mode (line sequential output)
1/60N
1/60 second non-interlace mode (ODD/EVEN simultaneous output)
1/301
1/30 second interlace mode (output of EIA standard.)
GAIN switch
Switches the camera sensitivity.
GAIN
Sensitivity
Remarks
ON
0-9dB
Adjustable with the volume inside the camera
controller.
OFF
OdB
Normally set to this position.
® Electronic shutter switch
Performs setting of the standard mode and shutter speed (exposure time) at 1 pulse
trigger mode, and switching into 2-pulse trigger mode.
DC IN 12V terminal
Used as a DC 12V input terminal.
VIDEO terminal
Develops video signal (VIDEO 1).
---- Important ..........
The VIDE01 output of 7512,1 V(p-p), is obtained from either terminal of the DC IN/SYNC
or the VIDEO. The output is not developed simultaneously from both terminals.
@ Top cover securing screws
Remove 5 securing screws, and remove the top cover to set switches and to adjust
volume inside the camera.