1 1. freeze mode, 1 2. location and function of internal switches – Toshiba IK-542XD User Manual

Page 17

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

1 1. FREEZE MODE

When the video signal output is developed in 1/301, 1-field still image is obtained with the
freeze switch (S20l(D) "ON" in 1-pulse trigger SYNC non reset mode or 2-pulse trigger SYNC

non reset mode.

Trigger

pulse _______

I L

Video
output
VIDEO 1

VIDEO

INDEX

Exposure

tim e

"U—

1 г

-1.5H

1 2. LOCATION AND FUNCTION OF INTERNAL

SWITCHES

Location diagram of the CCU internal switches

Name

Function

Location

S201®~®

1-pulse / 2-pulse trigger

mode setting

Refer to the Table 1.

5201®

Freeze (Note 1)

S201®

Low speed (1/30 second)

shutter (Note 2)

S202

Trigger input

TTL

impedance switch

OPT

S101

Gamma correction switch

1.0

0.45

Note 1:

This is available only when the video signal is developed in 1/301 of either 1-

pulse trigger SYNC non reset mode or 2-pulse trigger SYNC non reset mode.

Note 2:

This is available only when the video signal is developed In 1/301 of the normal

mode with the electrical shutter switch set to "0".

- Important:

When changing the switch setting, always turn off the power, and use an insulated

screw driver, etc.