Troubleshooting, Trouble – JVC GZ-HM960U User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Troubleshooting
If you encounter problems with this unit, check the foiiowing before requesting service.
1 Refer to “Trouble” below.
2 Refer to the “Troubleshooting” section in the “Detailed User Guide”.
If you have difficulties operating the unit, refer to the detailed descriptions in the “Detailed
User Guide”.
•
3 Refer to the FAQ of new products on JVC’s website.
•
4
This unit is a microcomputer-controlled device. Electrostatic discharge, external
noise and interference (from a TV, a radio, etc.) might prevent it from functioning
properly.
In such a case, reset the unit.
(T) Turn off the power. (Close the LCD monitor.)
(D
Remove the AC adapter and battery pack from this unit, reattach them, open
the LCD monitor and this unit powers on automatically.
5 If the above do not solve the problem, consult your nearest JVC dealer or JVC
service center.
Trouble
FOVVER./CHARGE
lamp starts blinking
when trie monitor is
dosed.
Recording cannot be
performed.
Recording stops
automaiically.
Sound or video is
interrupted.
• The battery pack is being charged.
10
• Check the (M / Q button.
• Set to the recording mode by tapping
the button.
15
18
• Turn off this unit, wait for a while, and
turn it on again. (This unit stops
automatically to protect the circuit when
the temperature rises.)
• Recording stops automatically after 12
hours of continuous recording.
-
• Sometimes playback is interrupted at
the connecting section between two
scenes. This is not a malfunction.
-
^ . For more information, refer to the Detailed User Guide