Kenwood BJV140Z - Manual (Page 36)

Editing
V
' D5n^''C (E
Use the following procedure to divide a track into two by inserting a track number in its middle. For example, by inserting an
additional track number before the passage you are specially fond of, it is easy to skip to there when you play the disc later.
3B Note that the track numbers of the tracks located after the divided track are automatically incremented.
The preview function allows to fine-adjust the track division point by playing the divided part repeatedly.
Preparation
O Play the MD track to be divided.
0 Press the EDIT/SPACE key to switch the
editing mode on.
Limitation of functionality due to MD standard
Some functions are limited due to the restrictions im­
posed by the MD standard. Before considering the symp­
toms as a sign of trouble with the unit, please read
"Symptoms related to MD standard". - _5o_
Dividing the track being played (TRACK DIVIDE)
Select "DIVIDE".
The modes are switched by rotating the JOG DIAL.
I* 1 DIVIDE? Dividing a track
E COMBINE? Comb ining t'acKS
3 ERASE? : Erasing tracMSi
- 4 MOVE? : Moving iTeoraeringi t'acks
Editing IS aborted if no operation nas oeen oerformec fo" 8 seconos
\\j//
.9
When preview is not required, press the ENTER key once Iso
that "ok?" is displayed), then go to step B.
Preview the result
\\ 1 //
-------- —
(The first 3 seconds after the division point is repeated
I It preview IS started at the end of a track, the preview continues till the
next track (the first track it it is started in the last track), but the part in
the next track cannot be divided by TRACK DIVIDE.
• Fine adjustment is oossible while monitoring the sound.
• A The dividing point can be iine-adjusted only in the forward direction
from the point where the EDIT / SPACE key was pressed initially, in 32
steps and for about 60 nns (6/100 sec.) per step,
it IS recommended to start fine adjustment from slightly before the
initial division point.
\\ j//.