Direct access tuning, 2 enter the frequency, Frequency step setting – Kenwood KDC-MP408U User Manual
Page 9: 1 turn the power off, 2 switch the frequency step, Tuner operation, English i
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Function of remote control
Direct Access Tuning
Tuner Operation
Entering the frequency and tuning.
1 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
"------ " is displayed.
2 Enter the frequency
Press the number buttons on the remote
control.
Example:
------ ^
- -1
92.1 MHz(FM)
[0],[9],[2],[1]
810 kHz (AM)
[0], [8], [11, [01
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
You can enter the FM band frequency in steps of a
minirmum of 0.1 MHz.
Function of KDC-MP408U
Frequency Step Setting____________________
Changing the tuning frequency step.
The original setting is FM band 50 kHz.
1 Turn the power OFF
Press the [SRC] button for at least 1 second.
2 Switch the frequency step
While pressing the [1] and [5] buttons, press the
[SRC] button.
Release your fingers from the button after the
display appears.
The frequency step changes to FM band 200 kHz.
When the same operation is repeated, the frequency
step returns to the original setting.
When the frequency step is changed, the frequencies in
the memory are deleted.
English I
9