Rower/source select button, Volume control control knob, Faceplate release roloaso – Kenwood KDC-MP408U User Manual
Page 4: Auxiliary input auxiliary input, Band select control knob, Tuning control knob, Basic operation, Fmtíhns, Tuner funtíhns
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Basic Operation
[AUTO] Release [MJOG] Display Disc slot Auxiliary iriput [Jit]
[►II] Control knob
[Sm
[1] [2] [3] [4] [5] [6] USB Terminal
Generili
fmtíhns
I
[SRC]
Rower/Source Select button
Turns on the power.
When the power is on, the source switches between
Tuner (TUNER'), USB or iPod ('USB" or 'iPodI,
CD (“CD"), Auxiliary Input (*AUX*), and Standby
(“STANDBY'} each time this button is pressed.
Press at least 1 second to turn off the power.
avoid places with too much dust or the possibility of water
splashing.
To prevent deterioration, do not touch the terminals of the
unit or faceplate with your fingers.
For whether USB devices and iPod can be connected, refer
to
When an optional accessory is connected, the source name
for each device appears.
When connection of the iPod is recognized, the source
display changes from 'USB' to “iPod",
Volume control Control knob
Turn the knob to adjust the volume.
Faceplate release Roloaso
Releases the faceplate lock so that it can be removed.
Refer to the following diagram when reattaching the
faceplate.
Auxiliary Input
Auxiliary Input
Used to connect a portable audio device with mini
plug cable (3.5
0
),
• Use the mini-plug cable (stereo) which dc^s nc«: have any
resistance.
Muting volume upon reception of phone call
When there is a call, “CALL" is displayed and the audio
system is paused.
When the call ends, "CALL* disappears and the audio
system comes back on.
The audio system comes back on when [SRC] is
pressed during a call.
Subwoofer output ^ Control knob
Switches between ON (^BWOOFER ON”) and OFF
("SUBWCX)FER OFF') each time pushing toward down
for at least 2 seconds.
Tuner funtíhns
A
The faceplate t$ a precision piece of equipment and can be
damaged by shocks or jolts.
Keep the faceplate in its faceplate case while detached.
Do not place the faceplate (and the faceplate case) in areas
exposed to direct sunlight, excessive heat or humidity. Also
Band select Control knob
Switches between FM1, FM2, and FM3 each time
pushing toward up.
Switches to AM when pushing toward down.
Tuning Control knob
Changes tfi^requency when pushing toward left or
right.
During reception of stereo stations the "ST* indicator is ON.
KDC-X492/KDC-MP438U/KDC-MP408U/KDC-MP338