Kenwood KDC-MP408U - Manual (Page 12)

Menu Operation
Menu System
tup the following functions;
Display Setting Source
"SECURITY
SET"/
"SECURITY
CLR" Referto
page 12 Sets/Resets security code EÌ1
"CLOCK
ADJUST" Referto
page 13 Sets the clock. JMzé
"DISPLAY" 0N*/0FF Turns offthe display when no
operation is performed.
—
"DIMMER"
*1,2,3
AUT0*/0FF Dims the display in conjunction
with the light switch of the
vehicle.
"DIMMER"« ON/OFF* Adjusts the brightness of
the display according to the
surrounding illumination.
"DOT LINE" 0N*/0FE Specifies whether to display the
red dotted line on the display.
"SWPRE"«''REAR*/
SUB-W
Sets the preout output.
"AMP"«' 0N*/0FF Turns on/offthe built-in amplifier.
"AMS
CONTROL"*' Referto
page 13 Controls the connected LX
amplifier. —
"Z0NE2"*'''’REAR*/
FRONT
Specifies the destination of AUX
input sound when the Dual Zone
function is turned on. fSB~l
"SUPREME" 0N*/0FF Turns ON/OFF the Supreme
function.
"CRSC" OFF/ON* Switches to Monaural to decrease ■aji»
noise when reception is poor.
"NAME SET"Referto
page 14
Sets the display when switched
to AUX source.
"SCROLL" AUTO*/
MANUAL
Specifies whether the text is
scrolled automatically. —
"RECEIVE
MODE" Referto
page 14 Sets the receive mode of HR radio, iiiwii
"ESN" — Displays the Electronic Serial
Number of satellite radio.
"AUX" OFF/ON r/ Sets whether to display AUX
0N2 during source selection.
EH
"CD READ" r/2 Sets the CD read mode. mm
"DEMO
MODE" Refer to
page 14 Specifies whether to enable
demonstration. —
*Factory setting
Function of KDC-X492.
*2 Function of KDC-MP438U.
•3 Function of KDC-MP408U.
*'• Function of KDC-MP338.
Displayed item is depending on currently selected
source. The mark in Source column shows the
12
I KDC-X492/KDC-MP438U/KDC-MP408U/KDC-1
source to which the item is displayed.
[ SB I : Can be set in other than standby state.
m:\zm : Can be set in standby state.
MM : Can be set while Audio file source of CD/USB
(excluding iPod).
áldk^it : Can be set during FM reception.
: Can be set during Satellite radio source.
yimii : Can be set while accessing AUX source.
iSIrisI : Can be set while HD Radio source.
— : Can be set during all sources.
1 Enter Menu mode
Press the [M JOG] button for at least 1 second.
"MENU" is displayed.
2 Select the menu item
Push the Control knob towards up or down.
3 Set the menu item
Push the Control knob towards right or left.
4 Exit Menu mode
Press the [MJOG] button.
Refer to the respective page for information on how to
set the items with reference page number.
"ZONE2"is displayed when "2ZONE"in
(page 7) is set to "ON.
Refer to the (page 16) for the details of the
menu items.
Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF.
Activating Security Code
• You can set the Security Code with a 4 digit number of your
choice.
• The Security Code cannot be displayed or referenced. Make
a note of the Security Code and treasure it up.
1 Select Security Code item during Menu mode
Select the "SECURITY SET" display.
For how to select menu items, refer to
System>(page 12).
2 Enter Security Code mode
Press the Control knob for at least 1 second.
When "ENTER" is displayed, "CODE" is also displayed.
3 Select the digits to enter
Push the Controi knob towards right or left.
4 Select the Security Code numbers
Push the Control knob towards up or down.
MP338