System connections – Kenwood DP-M5520 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

System connections

Do not plug the AC power cord into the outlet until all connections are completed.

Connect the output Jacks of this unit to the input Jacks of the amplifier using audio cords.

Refer to the Instruction manual provided with your amplifier to ensure proper connection.

AC voltage selector switch

To AC outlet (Except for some areas)

Notes:--------------------------------------------------------------------

1. Be sure to connect the connection cordis) securely. If connec

tions are not made securely, sound may not be produced ■

and/or noise may be generated. Improper connections can

also cause player misoperation.

Before plugging/unplugging connection cords, be sure to

switch the power off and set the amplifier's volume control to
its minimum position.

If connection cords are plugged or unplugged without carry
ing out the above precautions, malfunction or damage may
result.