Before applying power, Ation, For the u.s.a. and canada – Kenwood DP-M5520 User Manual
Page 3: For australia and europe, Important, For the united kingdom, For other countries, Ac voltage selection, Ac voltage selector switch, Type a
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Before applying power
ation.
For the U.S.A. and Canada
For Australia and Europe
important!
Units shipped to the U.S.A, and Canada are designed for
operation on 1 20 volts AC only.
Safety precaution for a Polarized AC plug
However, some products may be supplied with a non
polarized plug,
CAUTION:
TO
prevent
electric
shock
do
not
USE THIS {POLARIZED} PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
For the United Kingdom
Important!
Units shipped to the U.K. are designed for operation on 240
volts AC only.
The mains plug must be removed from the wail socket prior to
any internal examination.
The wires in this mains lead are coloured In accordance with
the following code:
Blue................................................. Neutral
Brown............................................... Live
The wires in this mains lead must be connected to the
terminals in the plug as follows:
Wire colour
Plug terminal marking
Blue................................................. N or Black
Brown.............................................. L or Red
1, If a 1 3-amp plug is used, this must be fitted with a 5- amp
fuse.
2. If a 3-pin plug with earthing contact is used, no wire must
be connected to the E terminal.
Important!
Units shipped to Australia are designed for operation on
240 V AC only.
Units shipped to Europe are designed for operation on 220 V
AC only.
For other countries
important!
Units shipped to countries other than the above countries are
equipped with an AC voltage selector switch on the rear
panel. Refer to the following paragraph for the proper setting
of this switch.
AC voltage selection
This unit operates on 110-1 20 or 220-240 volts AC. The AC
voltage selector switch Type A or Type B on the rear pane! is
set to the voltage that prevails in the area to which the unit is
shipped. Before connecting the power cord to your AC outlet,
make sure that the setting position of this switch matches
your line voltage. If not, it must be set to your voltage in
accordance with the following direction.
Mote:-----------------------------------------------------------------------------
Our warranty does not cover damage caused by excessive line
voltage due to improper setting of the AC voltage selector
switch,
AC voltage selector switch
Type A
AC1 10-
120V^
1 ! !!!!
AC220VO/ ACaAOV'V
^ I T_,
Type B
□ffl
AC 110-
120V^/
AC220-
240V^/
Move switch lever to match your line voltage
with a small screwdriver or other pointed tool.
Safety preeautiens
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
A
I
CAUTION
EOTRIC St
JT..b.pENt
A
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SER
VICING TO QUALIFIED SERVICE PERSONNEL.
A
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIAN
GLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED “DAN
GEROUS VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT
MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
A
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT
THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SER
VICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.