Kenwood DP-M5520 - Manual (Page 15)

I^rogrammed piay
POWER switch
M To change the final selection in a pro­
gram
© in program mode, press the CLEAR key.
© Select a disc No. to be played with a DISC SELECTOR
key.
1 3 A S
= II
!t 1 1
..............
1
.........-.]
1
© Select a track No. to be programmed by pressing the
numeric keys (1 to 0).
DQIDOIB)
s T a s D
(^5) {^51
n
® At the moment the CLEAR key is pressed once, the
final selection in the program is cleared.
® By pressing the CLEAR key several times in se­
quence, the program contents can be cleared in a
backward sequence from the final selection,
® The track being played cannot be erased from the
program with the CLEAR key.
® The CLEAR key does not function during checking
the program contents.
ii To start repeat programmed piay
When the REPEAT key is pressed once in programmed
play mode, the entire program will be played repeatedly.
When the REPEAT key is pressed twice, the repeat
function will be canceled.
H To clear the whole program
All of the program contents is cleared if any of following
happens.
© When program mode is canceled by pressing the
P-MODE key {so that the PGM indicator goes off).
© When the CLEAR key is pressed for the same number
of times as the number of selections in the program.
@ When the POWER switch is switched OFF.
Lnj
0
® When the EJECT key ® pressed {the player enters
the track mode).
M To start programmed play
© Follow the procedure in 'To memorize a program".
© Press the PLAY/PAUSE key [F7ff1.
PLAY/PAUSE
Lights
© To stop programmed play, press the STOP key.
Biinks
® In programmed piay, the PGM indicator lights and the
program is played from the first selection.
® When the final selection in the program has been
played, the unit enters the stop mode.