Set to the use position, 2 set to the video mode, 3 press the key to be checked – Kenwood KC-993 User Manual
Page 21: Mnie
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■ To check the programmed contents
r
""
........ ... ........................................ V
^ Set to the USE position.
LEARN
USE
2 Set to the VIDEO mode.
AUDIO
VIDEO
mniE
3 Press the key to be checked.
* Verify that the component to be operated works correctly.
ITo change the programmed
contents
Perform the programming operation again referring to
"Programming operation" on the previous page.
• The previously-programmed content is cleared automatically and
replaced by the newly-programmed content.
■To clear the entire programmed
contents
You can clear all of the programmed contents, returning
this unit to tile initial status.
KC-S93 (En)
21