Operating instructions, Press the mute key – Kenwood KC-993 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operating instructions
INPUT SELECTOR knob
VOLUME CONTROL knob
I Basic operation
ITo mute the sound temporarily
With the remote control unit only
Press the MUTE key.
MUTE
5
The volume level display blinks.
Pressing the key again resumes the previous volume.
Note:
When the TAPE 2/ADAPTOR selector on the rear panel is set to the
TAPE 2 position and theTAPE 2/ADAPTOR key is set to ON, the source
selected with the INPUT SELECTOR knob cannot be heard from the
speakers. To listen to a source other than cassette deck 2, be sure to
set the TAPE 2/ADAPTOR key to OFF.
10
KC-B93 [En)