Wall mounting your hdtv, Attaching the safety strap, Wall mounting your hdtv attaching the safety strap – Vizio VF550M User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VIZIO VF550M User Manual
Wall Mounting your HDTV
Your HDTV can be mounted on the wall for viewing. If you choose to mount your HDTV on the wall, follow
the instructions below.
1
.
Remove the stand base
a. Disconnect the cables from your HDTV.
Place your HDTV face down on a soft, flat
surface to prevent damage to the screen.
Remove the eight (8) screws holding the
base to your HDTV. Pull downward on the
base and lift off.
b.
c.
2
.
Mount your HDTV on the wall:
a. Attach your HDTV to a wall mount (sold
separately) using the mounting holes in the back panel of your HDTV.
Read the instructions that came with
your specific wall mount to properly
hang your HDTV.
b.
■
I
||[|H
Attaching the safety strap
When your HDTV is not mounted on the wall, use the included safety strap to attach the HDTV to the wall
to reduce the chance of the HDTV being pulled over. The Safety Strap should be used with common
sense practice such as ensuring that children (or adults) do not climb up, grabbing the top of the HDTV
and pulling it onto themselves.
1.
Attach one end of the strap to the wall:
•
If you have a drywall finish attach it to a stud, using a
washer underneath the screw head.
•
If you have a solid wall you should use a lag bolt, again
using a washer under the nut.
2.
Attach the other end of the Safety Strap to
one of the upper wall mounting holes on
the back of the HDTV, using a washer
under the screw head.
8
■ ' i