Connecting an external r,eceiwer/a,ftip, Optical output of audio received with hd programs – Vizio VF550M User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VIZIO VF550M User Manual
Connecting an External R,eceiwer/A,ftip
AUDIO OUT
1
.
2
.
3.
4.
5.
6
.
7.
Note:
Turn off the power to the HDTV and Receiver/Amp.
Using an audio cable (white and red connectors), connect the
cable to the audio input connectors on the Receiver/Amp and
connect the other end to the
AUDIO OUT
audio connectors at
the rear of the HDTV.
Turn on the power to the HDTV and Receiver/Amp.
Press the
MENU
button on the remote control to display the On
Screen Display (OSD) menu.
Press the
MENU
button on the remote control to highlight the
Audio menu, then press
MENU
to select it.
Press
T
on the remote control to select
SPEAKERS.
Press ► on the remote control to select OFF so the sound from
the HDTV will be routed through your Receiver/Amp system.
Refer to your Receiver/Amp user manual to select the corresponding
audio input.
The audio output is not amplified and cannot be connected directly to external speakers.
Optical Output of audio received with HD Programs
(
j
If your sound system has a SPDIF (optical) digital audio input you can connect it to the
OPTICAL
digital audio out at the rear of the HDTV. This is active when receiving audio with the programs being
viewed no matter what input is being used.
22