Dtv/tv, Using the antenna or cable through your vcr – Vizio VF550M User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VIZIO VF550M User Manual
Using Your Antenna or Digital Cable for Standard TV or Digital TV
DTV/TV
CABLE/ANTENNA
1.
Turn off the power to the HDTV.
2.
Connect the coaxial (RF) connector from your antenna or cable to the
DTV/TV
CABLE/ANTENNA
connector at the rear of the HDTV
3.
Turn on the power to the HDTV.
4.
Select TV using the
INPUT
button on the remote or side of the HDTV, or directly by pressing
the
TV
button on the Remote Control.
Using the Antenna or Cable through Your VCR
DTV/TV
CABLE/ANTENNA
1.
Turn off the power to the HDTV and VCR.
2.
Connect the “Cutput to TV”, “RF Cut” or “Antenna Cut” connector on the rear of your VCR to
the
DTV/TV CABLE/ANTENNA
connector at the rear of the HDTV.
3.
Turn on the power to the HDTV and VCR.
4.
Select TV using the
INPUT
button on the remote or side of the HDTV, or directly by pressing
the
TV
button on the Remote Control.
Note: If you have an off-air antenna or cable TV, connect it to the “Antenna In” connector on the rear of
your VCR.
18