Vizio VF550M User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VIZIO VF550M User Manual
At this point, if a set-top box from your cable or satellite service company is being used, press the
LAST
button on the remote control and skip to Select Input Source in the next section. Otherwise
continue with the next step:
Initial Setup
Tuner
a. The Tuner screen will be
displayed. If you are using Cable
Service (with no box), press the
T
button on the remote control to
choose CABLE.
Press the ► button on the remote
to go to the next screen.
b. The Channel Scan screen will be
displayed; default choice is Scan.
Press the ► button on the remote
control to commence the search
for available channels to be stored
into memory.
If you do not want to scan for channels at this time,
press the
T
button on the remote to highlight Skip
Scan
and then press the ► button.
Initial Setup
Channel Scan
Note: If you select Skip Scan, you can scan channels at a later time by selecting the TV input, then going
to the Menu and selecting the Auto Search option in the TV menu.
c. The screen will now change to
show the progress of the search
for Analog (NTSC) and Digital
(ATSC) channels.
Initial Setup
Channel Scan
Note: DTV digital broadcast is not available in all areas. Refer to about availability in your area, type of antenna and in which direction to point your antenna. The channel
availability through cable depends upon which channels your cable operator supplies in Clear CAM;
consult your cable operator for more information.
26