Kenwood KAC 941 - Manual (Page 6)

TROUBLESHOOTING GUIDE
What often appears to be a malfunction is often due to user error in operation or connection.
When trouble occurs with your unit, please check the following before calling for service.
Symptom Cause Remedy
The sound ievel is tow.
(No sound from one
side.)
A speaker cord has become uncon­
nected.
Check the speaker cord con­
nections.
The sound quality is
bad. (The sound is dis­
torted.)
1. The speakers are connected to
the same wires,
2. A speaker cord is pinched by a
screw in the car body.
1. Connect each speaker tennina!
to its respective speaker output,
2, Check the speaker wiring.
SPECIFICATIONS
Specifications subject to change without notice.
Audio section
Max Power Output (1 kHz, 4 fl)
2 Channel Mode........................................................................................... 160 W-t-160 W
3 Channel Mode........................................................................................80 Wx2+160 W
4 Channel Mode....................................................................................80 Wx2 + 80 Wx2
Power Output
2 Channel Mode (1 kHz, 412, 0.5% THD).........................................................80 W + 80 W
3 Channel
Mode (20 Hz~-20 kHz, 4 12, less than 0.5% THD}............................40 Wx2
or (1 kHz, 2 12, 0.5% THD)............... .......................... ......... 40 Wx2
+ n kHz, 4 0, 0.5% THD}................................................................... 80 W
4 Channel Mode (20 Hz^20 kHz, 4 12, less than 0,5% THD}........... 40 Wx2 + 40 Wx2
(1 kHz, 2 12, 0.5% THD)...............................................40 Wx2 + 40 Wx2
Frequency Response (~3 dB)..............................................................................2 Hz-100 kHz
Signal to Noise Ratio...:....................................................................................... ............. 105 dB
Input Sensitivity (rated output} MAX....................................................................................... 0.1 V
MIN.......................................................................................5.0 V
Input Impedance.........................................................................................................................10 kO
Damping Factor (100 Hz).....................................................................................More than 150
Sub-Woofer Frequency (variable)............................................................................. 30-200 Hz
High-Pass Filter Frequency (variable)...................................................................... 30-200 Hz
General
operating Voltage......................................................................... 14.4 V (11 - 16 V allowable)
Current Consumption (MAX.)................................................................................................ 30 A
Dimensions (WxHxD)................................................................................... 280x50x200 mm
(11 X1-15/16X7-7/8 in.)
Weight................................................................................................................... 3.1 kg (6.8 lb)
10 (Efi)