Uniden HH979XL - Manual (Page 21)

MEMORY DIALLING
You can store up to 10 telephone numbers into memory.
Each telephone number can be up to 30 digits bng.
STORING A TELEPHONE NUMBER INTO
MEMORY
To store 3 number into memory, do the following:
• Press [ST] key. Note that the LCD Display is flashing,
(as shown) ( iji'd
• Enter the desired telephone number with the appropriate
STD and IDD Area Codes.
• Press [ST] Key again.
• Enter the desired Memory location (choose from 0 to 9).
A confirmation BEEP will sound and the LCD Display
stops flashing.
ERASING A STORED TELEPHONE NUMBER
• Press [ST] key. Note that the LCD Display Is flashing.
• Press [CL] key.
• Press [ST] key and the memory location number (0 to
9]. A confirmation BEEP will sound and the LCD
Display stops flashing.
Note: Whilst STORING and ERASING a telephone
number:
- If you entered the wrong sequence, an error tone
will sound and the programming mode will end.
- If you have not keyed any digit within SOseconds,
an error tone will sound and the programming
mode will end.
RECALLING THE STORED TELEPHONE
NUMBER
• Press [RC] Key.
• Press the required memory location (0 to 9} desired.
• Press Asterisk [*] Key. Your Seaphone ID and the
stored telephone number will automatically be transmit­
ted.
Note: When the memory location is not entered an error
tone will sound arid RECALL mode will end.
Should you wish to disrxintinue memory recall
dialling, just press [CLJ Key.
Page 19 HH979XL