Char-Broil SANTA FE 10301569 - Manual (Page 12)

10
9
grill using (2) 1/4-20x1/2” long hex screws and (2)
1/4” flange nuts each.
12
Attach left and right shelf brackets to both ends of • Attach (3) slats to each set of shelf brackets using (6)
#10-24x1/2” screws. DO NOT
TIGHTEN UNTIL ALL SLATS ARE ATTACHED.
Lid shown removed for clarity.
11
attached hanger hooks should be facing away from ash pan.
• Lower ash pan into bottom section. Set hooks into holes in each
end of the lower body. Raise and lower ash pan as desired for
temperature control.
Place the wire cooking grate into position as shown.
• Attach a wire ash pan hanger to each end of the ash pan. Once