Char-Broil SANTA FE 10301569 - Manual (Page 11)

8
• Slide hook end of (1) wire door stop into slot in end panel
of top assembly with hook facing back of the grill.
• Next slide the other end through slot in end panel on bottom
assembly. With aid of a helper attach lower end of door stop to
Bottom assembly using (1) 1/4-20x3/4” ) hex screw
from outside and (1) 1/4” flat washer and a reversible lock nut as
shown. Repeat process on other end.
7
11
• Attach (2) daisy wheel dampers to bottom assembly and (2) daisy wheel
Dampers to firebox and lid assembly using (1)1/4-20x1/2” hex screw, (2) flat
washers and (1) reversible lock nuts as shown. DO NOT FULLY TIGHTEN to allow for damper movement.
Handle
Latch
Flat Washer
Nut
Lock Washer
Attach dampers to the lid in the same manner..
Attach Handle to Clean out door by passing threaded end of the handle rod through the door as shown.
Place latch, flat washer, lock washer onto the end of the handle rod and secure with nut.