Compaq 285558-001 - Manual (Page 26)

1–20 Software Guide
CD and DVD Software
Easy CD Creator Tips and Troubleshooting
Playing CDs and DVDs
Do not initiate Standby or Hibernation while playing any
medium. For more information about this issue, see “Avoiding
Standby and Hibernation” in this chapter. For general information
about Standby and Hibernation, see Chapter 2, “Power.”
Using CD Copier
When you use CD Copier to copy the contents of an entire
medium to your hard drive, select the Copy button immediately
after selecting the Copy to HDD First check box.
Ä
CAUTION: If there is a delay after you select the Copy to HDD First
check box, the Easy CD Creator software may clear the Copy to
HDD First check box and the medium may not be copied to the
hard drive. Typical delays include opening or closing the drive tray,
pausing to close an open application, or changing other settings in
the Easy CD Creator software.
Creating Media for Use in Other Systems
A CD-R created with DirectCD can be read by a compatible
CD-ROM drive only if you select the Rearrange the Files option
as you create the CD-R.
✎
A CD-RW, DVD-RAM, or DVD/CD-RW created with DirectCD
can be read by a computer that does not have DirectCD installed
only if you install UDF Reader on your notebook before creating
the medium.
If you did not install UDF Reader at the UDF prompt the first
time you inserted the medium into your notebook, reinsert the
medium, then install UDF Reader at the UDF prompt.