Canister, Hood, Hose – Kenmore 116.21513 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CANISTER
1. Open the canister hood,
2.
Check to see that the dust bag is proper
ly installed. See BAG CHANGING for
instructions.
3. Check to see that the motor safety filter is
properly installed. See MOTOR SAFETY
FILTER CLEANING for instructions.
HOOD
it is normal for the canister hood to come off
when opened further than needed, Line up
the hinge slots, insert them, and close the
hood to replace it
HOSE
1. Line up the
hose latch tab
and notch in
canister hood
and insert hose
into canister until
it snaps in place.
To remove: Lift
hose latch tab
upward and pull
up on hose.
2. Insert
handle into
wand until
lock button
snaps in
place Be
sure hose
is not
twisted.
To remove:
Press han
dle release
button and
pull up on
handle.
To store: Disconnect hose from wands and
canister to prevent stress on hose during
storage Store hose In a loosely coiled
position so the hose covering is not
stressed.
Hood
Release
Attachment
Storage
Dust Bag