How your vacuum works, Canister care bag changing – Kenmore 116.21513 User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

HOW YOUR VACUUM WORKS

The vacuum cleaner creates suction that
picks up dirt. Rapidly moving air carries
the dirt to the dust bag through the
airflow passages. The dust bag lets

the air pass through, while it traps

the dirt

For best cleaning results, keep

the airflow passage open
Check the starred areas
occasionally for clogs.

Unplug from outlet

before checking

Motor

Safetf

Fiiter

£if?i3 us

Filter

CANISTER CARE

BAG CHANGING

For best cleaning results, the dust bag

should be changed often . The performance
indicator (some models) will specify when
the dust bag needs to be changed or the
airflow is blocked. NOTE: See PARTS AND

FEATURES for Bag Number

1. Unplug cord from

wall outiet.

2. Remove hose
from canister.

3. Puli hood release
out and up, then lift
canister hood.

4. Disengage
cardboard tab trom

red bag mount by

pulling away and
lifting up

5. Pull bag out of
the red bag mount.

Motor

Safety
Fitter

Red Bag
Mount

6. Check and

replace, if

necessary, the
motor safety
filter,

7. The red bag mount will flip forward after
removing bag,

Rotate red bag

mount down and
install bag into
slots per
int ructions
pushing down untii
the cardboard tab
locks into position
and the holes
align. Tuck the bag
securely into the bag cavity so that none of it
is able to be pinched by the hood,

Replace and latch canister hood.

10. insert hose into canister.

11. Plug cord into wall outlet.

NEVER REUSE A DUST BAG. Very

fine materials, such as carpet fresh*

ener, face powder, fine dust, plaster,
SDot, new carpet lint, etc. can clog

the bag and cause It to burst before

IS Tuii anci may cause damage to

vacuum motor. Change bag more
often when vacuuming these materi
als.

This manual is related to the following products:

116.20512