A. faceplate timer features, Faceplate timer features -1 & 2-2, How your water filter works – Kenmore TANNIN 625.348261 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 2
HOW YOUR WATER FILTER WORKS
A. FACEPLATE TIMER FEATURES
RECHARGE NOW
For times you expect to use
more water than usual, use the
RECHARGE NOW feature.
Press the RECHARGE button
and hold in for three seconds.
"RECHARGE NOW"
begins to
flash in the display and a re
charge starts right away. You
will have filtered water when the
recharge is over in about two
hours.
FIGURE 3
VACATION
The day you leave on vacation
or other long absence, press and
release (do not hold) the RE
CHARGE button.
"VAC"
begins
to flash in the display. The timer
will keep time, but the filter will
not recharge and waste water.
When you return, press and release the RECHAR
GE button again to return the filter to service, and
the correct time of day will show in the display.
Remember to do this
or the filter will not recharge
and you will soon have tannins in your water sup
ply.
NOTE:
While in VACATION, the filter will go
through a recharge if the RECHARGE NOW fea
ture is used.
To shut off the water supply to the filter, use the
plumbing bypass valve(s) . . . Figure 13 on page
4-1.
FIGURE 4
ERROR CODE
FIGURE 5
An error code could appear in the faceplate dis
play if a problem occurs in the filter electronics. If
you see and error code instead of the present time
of day, please call your local Sears Service Depart
ment for service.
2-1
Problems, Questions? Call 1-800-426-9345 Kenmore Water Line