Kenmore TANNIN 625.348261 - Manual (Page 18)

SECTION 4 OTHER THINGS TO KNOW
A. DIMENSIONS / SPECIFICATIONS
Supply Water Limits
Pretreatment Needed
For Higher Amounts
Listed
MAX, WATER HARDENSS:........................................................... 10 gpg Water Softener
MAX, CLEAR WATER IRON: ........................................................ 2 ppm
Water Softener and/or
Iron Filter
MAX, CHLORINE*: ........................................................................ 1 ppm Activated Iron Filter
MAX, TANNIN: ............................................................................... 3 ppm
MAX, pH: ........................................................................................ 8,0
MAX, NITRATES:........................................................................... 2 mg/L
MAX, SUSPENDED SOLDS*:........................................................ 1,0 NTU
INLET WATER PRESSURE LIMITS:............................................. 20-125 psi
MAX, INLET WATER TEMPERATURE: ....................................... 120T
MIN, INLET WATER FLOW:........................................................... 4 gal/min.
MIN, INLET AND OUTLET PIPE SIZE:.......................................... 3/4 inch
BAOKWASH FLOW RATE (at 35 psi inlet pressure):.................... 1 gal/min.
MIN, SALT USAGE AT EACH REGENERATION:......................... 5 lbs
MIN, FREQUENCY OF REGENERATIONS: ................................ every 2 days
CAPACITY RATING: ...................................................................... See Rating Decal on Filter
continuous
4-2
Problems, Questions? Call 1-800-426-9345 Kenmore Water Line