Water filter start up – Kenmore TANNIN 625.348261 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SECTION 1

WATER FILTER START UP

B. CHECK LIST OF ALL STEP-BY-STEP GUIDES TO INSTALL

Refer to the Installation Manual, part number

7146611, for step-by-step guides.

To be sure you have done all the steps to install

the filter, read the following list. Page numbers

referred to are in the Installation Manual.

y" Is the house water flow going INTO the filter

valve INLET? Trace piping to be sure . . . page

K' Is the plumbing bypass valve (or three valves)

set for SERVICE? . . . See Figure 13, page 4-1 of
this manual.

K' Is the valve drain hose connected the right

way, and without sharp bends or kinks that
could stop or reduce water flow? . . . page 14.

y" Is the transformer plugged into an inside, con

tinuously "live", grounded, 120V-60Hz electri
cal outlet. . . page 17.

y* Be sure to restart the water heater . . . page 18.

FIGURE 1

water
supply

1-2

Uil

Problems, Questions? Call 1-800-426-9345 Kenmore Water Line