Stabilizing to the floor, How to use the stabilization bolts, Specifications – Pioneer PDK-TS01 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3. After assembling, connect the stand to the
floor to prevent from falling over.
■ Stabilizing to the floor
• Use screws (sold separately) to attach and stabilize the
stand.
■ How to use the stabilization bolts
1. Attach the included bolts that prevent the display, from
falling over.
2. Stabilize the display by connecting to a wall or standing
beam with a strong cord.
(Repeat the same steps in the laterally direction to stabi
lize the assembly to the left and right.)
Use cord and hooks that are available on the market (sold sepa
rately).
Installation coordinates for screws used to stabilize the stand to
the floor
* When stabilizing the stand to the floor, use M6 with a length above 20 mm (25/32 inch).
Units: mm (inch)
248 (9-3/4)
485(19-3/32)
II
a
)
I
B II ^^l
^ \ \
I I \
J
Specifications
Dimensions.....
566 (W)
X
508 (H)
X
339 (D) mm
(22-9/32 (W)
X
20 (H)
x
13-11/32 (D)
in/
Weight.................................4.0 kg (8.82 lb)
.................................42.9 kg (94.58 lb)
(when the plasma display is attached)
14