Stand attaching to the plasma display, Normal installation – Pioneer PDK-TS01 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2. Stand attaching to the Plasma Display
■ Normal Installation
Step 1.
With the plasma display lying flat, insert and secure the two Installation bolts ® (M8 x
20)
in the holes "a” located in the plasma display housing.
At this point, tighten these bolts ® only until the threads are no longer visible when
viewed from t he side (you will be unable to attach the display if the bolts are screwed in
completely).
Regarding the stand pipe screw holes when the stand is used as a desktop stand
Stan(j pipe screw holes when the
s t a n d
is
u s e d
as a (desktop stand
• Specifications........................................................ Nornnal use
• Screw holes used with stand orientation.............. ®, (§)'
Note:
Screw holes ®, ®', © and ©' are for attaching options available separately.
11