Kenmore 790.4809 - Manual (Page 12)

Setting the Oven Controls
Setting Preheat
Pre
The
H«at
pad controls the Preheat feature. The Preheat feature will bring the oven up to temperature
and then indicate when to place the food in the oven. Preheating is not necessary when
roasting or cooking casseroles. The oven can be programmed to preheat at any temperature
between 170°F to 550°F.
INSTRUCTIONS PRESS DISPLAY
To set the Preheat temperature for 350°F
1. Arrange the interior oven racks.
2. Press
Heat.
"350" (the default oven temperature set) and "BAKE"
will appear in the display (Fig. 1).
3. Press "BAKE" will appear in the display. "PRE" and the
actual oven temperature shown in the display will alternate as the
oven heats and reaches 350°F (Fig. 2).
Note: After the oven has reached the desired temperature (this
example, 350°F) the control will sound
a
long beep, the "PRE" will
turn off and oven temperature will be displayed (Fig. 3). When PRE
disappears from the display, the oven set temperature has been
reached. Once the oven has preheated, PLACE FOOD IN THE OVEN.
Press
'—'
when baking is complete or to cancel the preheat feature.
Pre
Heat
3G 3S0
Fig. 1
3u PPE
Fig. 2
3G 350
Fig. 3
To change Preheat temperature while oven is preheating
(example: changing from 350°F to 425°F)
If it is necessary to change the preheat temperature while the oven is
preheating to the original temperature:
. . . . 1. While preheating, press Heat again (Fig. 3)
2. Enter the new preheat temperature. Press 4 2 5. "425°" will
appear in the display (Fig. 4).
3. Press "PRE" will appear in the display as the oven heats to
425°F (Fig. 5). A long beep will sound once the oven temperature
reaches 425°F (Fig. 6
).
4. When baking is complete press
Note: During the first rise of temperature, the convection fan will be
activated to allow the oven to reach its target temperature faster. The
Bake, Broil and Convection elements will also cycle for
a
better heat
distribution.
4 25
3u
435
Fig. 4
3u
Fig. 5
:3u 435
Fig. 6
12