Kenmore 790.4809 - Manual (Page 11)

Setting the Oven Controls
Setting Accent Light
Your appliance includes
a
decorative Accent Light centered horizontally across touch-sensitive control panel. The Accent
light comes with
a
theatre style intensity feature that slowly increases brightness at turn on and slowly fades when turning
off.
When the Accent light is off, the light is in automatic mode. This means the Accent light will turn on automatically when an
oven or Timer has been activated. The Accent light will turn off automatically when these functions are no longer active.
Accent
When the Accent light is OFF, it may be turned ON by pressing Light once. When the Accent light has been manually turned
Accent
on, it will remain on until manually turned off by pressing Light again. The brightness may also be adjusted.
INSTRUCTIONS PRESS DISPLAY
Example - To adjust the Accent light brightness:
Accent
1. Press and hold
Light
gntil an acceptance tone sounds (about
6
seconds)
2. The default setting of TOO will appear in the display (See Fig. 1).
3. Using the numeric keypad, enter any digit from 0 to 100 to
change the brightness level. Entering 0 (Fig. 2) will effectively
turn the Accent light OFF until the brightness level is adjusted to
a
higher level.
4. Press to save the desired brightness setting.
Accent
Light
Value between
0
to
100
_ _ mn
CC
Fig. 1
CC u
Fig. 2
Operating Oven Lights
The interior oven lights will turn ON when the oven door is opened.
Press i to turn oven light ON an OFF whenever the oven door is closed.
The interior oven lights are located on the rear wall of the oven interior and are covered with
a
glass shield. The glass shield
protects the bulb from high temperatures and should always be in place whenever the oven is in use.
To replace the interior oven lights, see Replacing oven lights in the Care and Cleaning section.