Pioneer CDX-P2050VS - Manual (Page 12)

Voice Operation
Requesting Names
By requesting (pronouncing) the name you have recorded, the desired function (CD track,
Station, Source, Listening position or Equalizer mode) can be loaded. When you request
and load a CD track or station by using a Head unit compatible with this product, the
source is automatically switched, too.
• If you are using this product as an external unit connected to a Head Unit, the source
cannot be switched automatically. Switch the source before making a request.
1. Set the Request Mode.
After the currently selected sound source disappears, a guidance “Make a request.” is
announced, followed by a beep sound.
Pronounce the recorded name of the function that you want to load.
Example: “Summer”:
After the guidance “Thank you.” is announced, the requested function is loaded.
Note:
• When the Head unit is in the traffic information mode, you cannot load Equalizer mode names.
• When the Head unit source is off, you cannot load Equalizer mode or Listening position names.
• Depending on the status of the unit used for loading, it may not be possible to load.
• If you cannot load a desired function by operating the Head Unit, loading by pronouncing the
name of that function is also not possible.