Switch to the recording mode, After the beep, say the name you desire to record – Pioneer CDX-P2050VS User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Recording Names for Audio mode (Equalizer mode. Listening position)
Record in advance the equalizer mode or the listening position names that you want to
load by voice.
1. Select the Head unit to the equalizer mode or listening position to be
recorded.
2. Switch to the recording mode.
Hold for 2 seconds
After the currently selected sound source disappears, a guidance “Say equalizer mode
name to be registered.” is announced, followed by a beep sound.
To record a Listening position, press the A button again while the guidance is being
announced.
The Head unit is then switched to the Listening position recording mode, and a guidance
“Say listening position name to be registered” is announced, followed by a beep sound.
3. After the beep, say the name you desire to record.
Example: To record the current equalizer mode with the name “vocal”:
Face the mic and say “vocal”. You will hear “vocal” output from the speaker.
4. The ‘‘Naming is complete” voice guidance message is announced.
Note:
• When the Head unit is in the traffic information mode, you cannot record equalizer mode names.
• The Head units with which you can record and load Equalizer mode and Listening position names
are as follows:
DEH-P9050, DEH-9000R, DEH-P900R, MEH-P9050 and MEH-P9000R
• The Head units with which you can record and load equalizer mode names only are as follows:
KEH-P8850, KEH-P8800R, KEH-P8800R-W, DEH-P8050 and DEH-P8000R