Howto start, Warning, Caution – Kenmore ASPIRADORA 116.23513 User Manual
Page 8: How to start
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HOWTO START
A
WARNING
Personal Injury and Product Damage
Hazard
• DO NOT plug in if switch is in ON
position. Personal injury or
damage could result.
• The cord moves rapidly when
rewinding. Keep children away
and provide a clear path when
rewinding the cord to prevent
personal injury.
• DO NOT use outlets above
counters. Damage from cord to
items in surrounding area
coulldoccur.
Cord
Rowlnd
Bar
1. Pull cord out of
canister to desired
length. The cord
wilt not rewind until
the cord rewind
bar is pushed.
NOTE:
To reduce the risk of electric shock,
this vacuum cleaner has a polarized plug;
one blade is wider than the other. This plug
will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, con
tact a qualified electrician to install the prop
er outlet. Do not change the plug in any
way.
2. Plug the polarized power cord into a 120
Volt outlet located
near the floor.
To rewind:
Unplug
the cleaner. Hold
the plug while
rewinding to pre
vent damage or
injury from the
moving cord. Push
cord rewind bar.
3. Lower wand from upright position by
pressing on the handle release pedal.
A
CAUTION
DO NOT leave the Power-Mate*
running in one spot in the upright
position for any length of time.
Damage to carpet may occur.
4. Select a pile height setting by pressing
the small pedal on the rear of the Power
Mate®, The pile height setting shows on the
indicator. See SUGGESTED PILE HEIGHT
SETTINGS.
Attention:
Refer to your carpet manufac
turers cleaning recommendations. Some
more delicate carpets may require that they
be vacuumed with the Power-Mate* agitator
turned off, to prevent carpet damage.
5. Select a switch
position on the
handle.
FLOOR
- turns on the canister motor only.
CARPET
- turns on both the canister and
the Power-Mate* motors.
NOTE
- When this switch is in the
FLOOR
position, the headlight and dirt sensor
(some models)
DO NOT
function since no
electricity flows to the Power-Mate*.