Anging^and agitator cleaning, To remove belt, To clean agitator – Kenmore ASPIRADORA 116.23513 User Manual
Page 17: Important
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ANGING^AND AGITATOR CLEANING>^«
TO REMOVE BELT
1. Turn Power
Mate® upside
down.
2. Unscrew the
two (2) Power
Mate® cover
screws.
3. Turn Power
Mate® right
side up. Press
handle release
pedal and
lower the
swivel. Lift rear
latches up.
4. To remove cover,
grasp the sides and
pull out.
5. Depress tabs
on rear of
agitator cover
and rotate
forward to
release from the
Power-Mate®
base.
Agitator
Cover
6. Lift agitator
assembly out
and remove
worn belt.
7. Check and clean end cap areas. See
AGITATOR ASSEMBLY for picture of
complete agitator assembly.
TO CLEAN AGITATOR:
NOTE: In order to keep cleaning efficiency
high and to prevent damage to your vacu
um, the agitator must be cleaned every time
the belt is changed.
The agitator must also be cleaned accord
ing to the following schedule:
Vacuum Use
HEAVY -
(used daily)
MODERATE -
(used 2-3 times/week)
LIGHT -
(used 1 time/week)
IMPORTANT
Clean Agitator i
every week
every month
every 2 months
Disconnect cleaner from electrical outlet.
Check and remove hair, string and lint build
up frequently in the Power-Mate® agitator
and end cap areas.
' \
Remove any dirt or debris in the belt path
area or in the brush roller area.
Carefully remove any string or debris
located on the agitator, or end caps.
17