Kenmore Microwave Oven - Manual (Page 27)

MICROWAVE
TWO, THREE OR FOUR-STAGE COOKING
Four-stage cooking lets you cook in four cooking stages each at a different power setting for a chosen
time or temperature. Set all stages before cooking and start the oven. Simply follow these steps:
1. Touch CLEAR.
2. Touch MICRO TIME or MICRO TEMP. The lights
above TIME or TEMP, above MICRO and below
STAGE 1 will go on. The display window will show “0”
or “F”.
3. Touch the correct numbers for the time or
temperature of the first cooking stage.
4. Touch MICRO CONTROL.
Display Window will read “HI”.
5. Touch the correct numbers for the cooking power
level of the first cooking stage (if other than “HI”).
6. Touch MEMORY/RECALL or PAUSE. The light
below STAGE 2 will go on. The display window will
show “0”.
7. Touch MICRO TIME or MICRO TEMP.
8. Touch the correct numbers for the time or
temperature of the second cooking stage.
9. Touch MICRO CONTROL. The display window will
show “HI”. ■
10. Touch the correct numbers for the cooking power
level in the second cooking stage (if other than “HI”).
IIA. Touch START for two-stage cooking.
IIB. If three-stage or four-stage cooking is desired, touch
MEMORY/RECALL or PAUSE. The light below
STAGE 3 will go on. The display window will show
“
0
”.
Repeat steps 7-10 above to set the third cooking stage at
the same or a different power level for a chosen time or
temperature.
12A. Touch START for three-stage cooking.
12B. If four-stage cooking is desired, touch
MEMORY/RECALL or PAUSE. The light below
STAGE 4 will go on. The display window will show
“
0
”.
Repeat steps 7-10 above to set the fourth cooking
stage at the same or a different power level for a
chosen time or temperature.
13. Touch START.
EXAMPLE: (Four-stage cooking)
All-American Meat Balls
(10 minutes, power level 70) (PAUSE)
(3 minutes, power level 70) (PAUSE)
(2 minutes, power level 70)
(MEMORY/RECALL)
(5 minutes, power level 0)
The following steps e,xplain how to set the oven.
First Stage (10 minutes; power level 70).
1. Touch CLEAR.
2. Touch MICRO TIME. ^
3. Set 10 minutes by touching
“1”, “0”, “0” and “0”. “1000” will
show in the display window.
4. Touch MICRO CONTROL.
“HI” will show in the display
window to remind you that the
oven will operate at highest
power unless you enter a lower
power setting.
5. Touch numbers “7” and “0”.
“70” will show in the display
window (indicating that you
have set the oven to operate at
power level 70).
The first stage has been set.
27