Kenmore Microwave Oven - Manual (Page 19)

MICROWAVE
“Hl-POWER” COOKING
I. Touch CLEAR, and a beep tone will be heard. The
CLEAR erases all previous settings. ■
J. Touch MICRO TIME. Lights above TIME and MICRO,
below STAGE 1 will go on.
("0” will show in the Display Window.)
3. Touch Numbers for Cooking Time.
Set the cook time by touching the suitable numbers on
the Control Panel. For example, to set 30 seconds, you
would touch “3" and then “0”. For 3 minutes, touch “3”
and then touch "O" twice. For 3-1. 2 minutes, touch “3”,
“3” and “0”. (Note: Remember, the timer is a digital
clock that is divided into 60 seconds. So 1/2 minute is
equal to 30 seconds. Touch 30 not 50 as with a
calculator.) The time set will show in the Display
Window at the top of the Control Panel.
NOTE: It is not needed to touch MICRO CONTROL
when cooking with highest power ("HI”). However, if
MICRO CONTROL is touched, the word “HI” will
show in the Display Window. This is to tell you that the
oven will be running on "HI” power unless a different
power setting is chosen,
.
4. Touch START. The oven will begin cooking, and the
Display Window will show the time counting down in
seconds.
A tone will sound and the word "End" will show in the
display window for two seconds when the cooking time
is completed. Then the oven will shut itself off.
NOTE: To stir food during cooking: open the oven
door: stir or turn the food; close the oven door; and
touch START. The oven will automatically continue to
count down the amount of time left on the timer.
Example: Fresh fish can be quick-cooked on “HI”
(max power) for 6 minutes. Here is the procedure:
1. Touch CLEAR.
2. Touch MICRO TIME.
3. Set 6 minutes by touching
“6”, then “0” twice. “600” will
show in the Display Window.
4. Touch START. The oven will
begin to cook and the time will
begin to count down in the
display window. A tone will
sound and the word “End” will
show in the display window for 2
seconds when the 6 minutes are
over. Then the oven will shut
itself off.
NOTE: If you want to keep the
food warm after finishing the set
cooking, you can use “Hold
Warm” feature. For detailed
instructions on using “Hold
Warm” feature. See page 18.
19