Kenmore HE2 PLUS - Manual (Page 18)

Temperature Guide Auto Temp Control
Wash Water Temperature......... Suggested Fabrics........................ (Auto Temp Control) electronically senses and nnaintains a
...................................................... ,. .............................................. uniform water temperature. АТС regulates incoming hot and cold
HOT Whites and pastels water. The АТС is automatically turned ON when a cycle is
Heavy soils selected. See Preset Cycle Settings table In “Cycles.”
--------------------------------------------------------------------------------------------- ■ АТС works for the wash temperature with Warm/Warm,
WARM Bright odors Warm/Cold, and Cold/Cold settings.
___________________________ Moderate to light soils__________ _ АТС works for the rinse temperature with the Warm/Warm
COLD Colors that bleed or fade setting.
Light soils ■ The Cold rinse temperatures depend on the cold water at
....... .................. ..:................ :................ ......................... .................. your faucet.
In wash water temperatures colder than 60°F (15.6°C),
detergents do not dissolve well. Soils may be difficult to remove.
Refer to this chart for suggested load types and their corresponding cycles. Listed to the right are the options available to each of these
washer cycles.
CYCLE SUGGESTED LOAD TYPE AVAILABLE OPTIONS
Delay Start Prewash 2nd Rinse Cycle Signal
Whitest Whites Soiled white fabrics ✓ ✓ ✓ ✓
Heavy Duty Heavily soiled underwear, towels, shirts, etc., made
of cotton ✓ ✓ ✓ ✓
Normal/Casual Normally soiled blouses, shirts, overalls, etc., made
of polyester, nylon, cotton, linen, or cotton blends ✓ ✓ ✓ ✓
Express Wash Small loads of 2-3 lightly soiled cotton, polyester,
nylon, and cotton blends. ✓ ✓ ✓
Delicate Curtains and delicate clothing, dresses, skirts, shirts
and blouses ✓ ✓ ✓
Rinse/Drain & Spin All loads ✓ ✓ ✓
Clean Washer No clothes ✓ ✓
18