Y warning y, Electrical connection, Installing your freezer – Kenmore 19502 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing Your Freezer
This appliance is designed to be free standing only, and should not be recessed or
built-in.
•
Place your freezer on a floor that is strong enough to support the freezer when it is
fully loaded.
•
Allow 5.9 inches (15 cm) of space between the back and sides of the freezer, which
allows for the proper air circulation.
•
Locate the freezer away from direct sunlight and sources of heat (stove, heater,
radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may
increase electrical consumption. The recomended operating ambient temperature
should be between 55°F( 12.8°C) and 110“F( 43.3 )°C.
® Avoid locating the freezer in moist areas.
•
Remove shipping material including base
Cut the packaging strap, then take off fhe packaging box and the interior protective plastic
bag . Remove the protective foams off the freezer and puf fhem inside the upended
packaging box, uplift the freezer and remove fhe botfom protecfive pad under fhe
freezer.
•
After plugging the appliance into a wall outlet, allow the unit to cool down for 2~3
hours before placing food in fhe freezer.
Electrical Connection
y WARNING y
Improper use of the grounded plug can result in the risk of electrical shock. If fhe power
cord is damaged, have if replaced by an aufhorized Avanti Froducfs service center.
Plug the freezer into an exclusive, properly installed-grounded wall outlet. Do not
under any circumstances cut or remove the third (ground) prong from the power
cord. Any questions concerning power and/or grounding should be directed
toward a certified electrician.