beautypg.com

To store attachments, Caution, Warning – Kenmore ASPIRADORA 116.36722 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

ATTACHMENTS

Dusting
Brush

Handi-Mate Jr.®

Stretch

Hose

Crevice

Tool

Identify each of the attachments shown

above.

A

CAUTION

When using attachments, be careful

not to overextend the stretch hose

when reaching. Trying to reach

beyond the hose stretch capability
could cause the vacuum cleaner to tip

over.

A

CAUTION

Attachments used in dirty areas, such
as under refrigerator, should not be

used on other surfaces until they are

washed. They could leave marks.

A

WARNING

Electrical Shock And Personal Injury
Hazard

Disconnect electrical supply before

servicing or cleaning the vacuum
cleaner. Failure to do so could result in
electrical shock or personal injury from

vacuum cleaner suddenly starting.

TO USE ATTACHMENTS

Remove the lower end of the stretch hose

from the vacuum cleaner by grasping the
hose collar, twisting and pulling straight out.
The attachments can now be added to the
hose.

Note: The motor protector may open

when using attachments or when clean­

ing new carpet, due to reduced airflow
by the attachments themselves or by
new carpet fuzz filling the dust bin

quickly. See the
TROUBLESHOOTING section.

The attachments will fit on the hose or

the wand. In addition, the dusting brush
will also fit on the crevice tool.

The hose can be pulled off the wand by
grasping the cuff and twisting while pulling

up.

The attachments can be added to the hose
if the item to be cleaned is not far from the

vacuum cleaner,

NOTE: When vacuum cleaner is turned on,

the hose will have a tendency to collapse
due to suction of the vacuum cleaner.

If more reach is needed:

Dusting Brush

Wand

An extra wand, without tabs, is included.
This extra wand can be added to the wand
with tabs for extra reach. Insert wand and
twist a quarter of a turn to secure fit.

If the dusting brush/combination brush is

being used and more reach is needed, the
crevice tool can be added to the wand, then

the dusting brush can be added to the
crevice tool.

TO STORE ATTACHMENTS

Return the hose to its position on the wand
and the attachments to their holders.