To replace belt – Kenmore ASPIRADORA 116.36722 User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TO CLEAN AGITATOR

NOTE: In order to keep cleaning efficiency

high and to prevent damage to your vacuum
cleaner, the agitator must be cleaned every

time the belt is changed.

The agitator must also be cleaned accord

ing to the following schedule;

Vacuum Cleaner Use

HEAVY -

(used daily)

MODERATE -

(used 2-3 times/week)

LIGHT -

(used 1 time/week)

Clean Agitator

every week

every month

every 2 months

Remove any dirt or debris in the belt path

area or in the agitator area.

TO REPLACE BELT

NOTE: See PARTS AND FEATURES for

belt number.

Loop the new belt on the motor shaft.

Loop the end of the new belt on the agitator.

Insert the agitator by placing the rounded

portion of the end cap down into the slot
in the nozzle base.

Motor
Shaft

NOTE; Care must be taken due to the belt

tension during reassembly.

BELT ROUTING

Press firmly, checking to see that each end

is completely inserted.

Belt

Agita tor Assembly

Check to see that the belt is centered in
the belt groove. Turn the agitator with your!T;^;i'^' ^

fingers to see that it turns freely.