Kenmore ASPIRADORA 116.36722 - Manual (Page 21)

CLOG REMOVAL
Always follow all safely precautions when
cleaning and servicing the vacuum cleaner.
^WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the vacuum
cleaner. Failure to do so could result in
electrical shock or personal injury from
vacuum cleaner suddenly starting.
If the vacuum cleaner does not seem to
have adequate suction, first check if the
dust bin is full or if a filter is clogged. See
DUST BIN CLEANING and FILTER
CHANGING.
If the dust bin and fiiter areas are free of
clogs, check the hose area. Remove the
lower end of the stretch hose from the vacu­
um cleaner by grasping the hose collar,
twisting, and puliing straight out.
Plug in the vacuum cieaner and turn it on.
Stretch the hose to maximum length and
then allow the hose to return to its storage
length.
Turn the vacuum cieaner off and unplug the
vacuum cleaner.
Visually inspect the hose and the base area
into which the hose is inserted.
Remove any visible clog.
Reassemble the stretch hose to the exten­
sion wand.
If the dust bin and filter areas and the hose
areas are free of clogs, check the nozzle
area. To check this area, see the section on
BELT CHANGING AND AGITATOR
CLEANING.
A
warning
Personal Injury Hazard
DO NOT place hands or feet underneath
the vacuum cleaner at any time. The
agitator wili be revoiving rapidiy when
the vacuum cleaner is turned on and is
in the carpet setting.
Return vacuum cleaner to the upright posi­
tion before plugging into an electrical outlet.
21