beautypg.com

Pile height selection and setting, Releasing the handle, On/off switch – Kenmore ASPIRADORA 116.36722 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

PILE HEIGHT SELECTION AND SETTING

To select a pile height setting:

Turn off vacuum cleaner. Select a pile height
setting by tilting the vacuum cleaner back
until front wheels are lifted slightly off the

floor as illustrated.

Slide the adjustment lever to the correct

setting.

SUGGESTED PILE HEIGHT SETTINGS

You may need to raise the height to make
some jobs easier, such as scatter rugs and
longer pile carpets. Suggested settings are:

HIGH: shag carpet, long pile, plush, scatter
rugs.

MED: medium to long pile.

LOW; short to medium pile.

BARE FLOOR; very low pile.

RELEASING THE HANDLE

Release the handle by pressing down on

the handle release pedal with your foot and
pulling back and down on the handle with
your hand.

ON/OFF SWITCH

To start the vacuum cleaner, push the
On/Off switch from the OFF position to the
ON position. To stop the vacuum cleaner,
push the On/Off switch to the OFF position.