Consumer defined control, Setting oven lockout feature, Instructions – Kenmore 790. 4789 User Manual
Page 11: To activate the oven lockout feature, Press, To reactivate normal oven operation, Display, Setting silent control operation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Consumer Defined Control
Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These
include the Oven Lockout, Temperature Display and Silent Control Operation features
Setting Oven Lockout Feature
The pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and prevents
the oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights.
INSTRUCTIONS
To activate the Oven Lockout feature
PRESS
1. Press and hold for 3 seconds.
2. After 3 seconds "Loc" will appear, a beep will sound and "DOOR
LOCKED" will flash in the display. Once the oven door is locked
the "DOOR LOCKED" indicator will stop flashing and remain on
along with the "Loc" (Figure 1).
To reactivate normal oven operation:
1. Press and hold (s^ for3 seconds. A beep will sound. The "DOOR
LOCKED'wiil flash in the display until the oven doorhas completely
unlocked (Figure2).
2. The wall oven is again fully operational.
(^^for 3
seconds
stop
)
for 3 seconds
DISPLAY
Figure 1
Figure 2
Setting Silent Control Operation
»
The DELAY TIME and FLEX CLEAN pads control the Silent Control operation feature. The Silent Control
operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control
can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS
To change control from normal sound operation to
silent control operation
1. To tell if your range is set for normal or silent operation press and
will appearand "DELAY" will flash in the display
hold (stari'
(Figure 3). AfterTseconds "SP" (Speaker) will appearin thedisplay
(Figure4).
2. Press to switch between normal sound operation and silent
operation mode. The display will show either "SP" (Figure 4) or
(Figure 5).
If "SP" appears (Figure 4), the control will operate with normal
sounds and beeps. I f a p p e a r s (Figure 5), the control is in the
silent operation mode.
3. Press . START to accept the change or press to reject the
change.
PRESS
\Star
for 7 seconds
START ) or {
stop
DISPLAY
Figure 3
Figure 4
Figure 5
Note: The control will always beep at the end of a kitchen timerand will beep when a set temperature has been reached, even
if the control is set to silent operation.
11