Kenmore 790. 4789 - Manual (Page 14)

The BAKE (Bake) pad controls normal baking. If preheating is necessary, refer to the Preheat Feature for instructions.
The oven can be programmed to bake at any temperature from 170“ F to 550“ F (the sample shown below is for 350“F).
Setting Oven Controls
Setting Bake
START
INSTRUCTIONS PRESS
To set the Bake Temperature to 375T
1. Arrange interior oven racks and place food in oven.
2. Press (Bake) , "350" will appearand "BAKE" will flash in the (Bake)
display(Figure
1 ). If a bake of 350“F is needed, press
start ..
3. Press
CD®CD
(Figure 2). "BAKE" will continue to flash
(DCDCD
and "375“” will appear in the display.
4. Press START , A beep will sound once the oven temperature
reaches 375“ F and the display will show "375“" and "BAKE"
(Figures).
Pressing will cancel the Bake feature at any time.
To change the Bake Temperature (example: changing
from 375T to 425T}
1. After the oven has already been set to bake at 375“F and the oven
temperature needs to be changed to 425“F, press (Bake) (Figure
4) and "375" will appearand "BAKE" will flash in fhe display.
2. Press ^7) ((
2
)) (Figure 5). "BAKE" will continue to flash
and "425“" will appear in the display.
Cl) CD CD
3. Press C.START)
Figures).
"BAKE" and "425°" will stay in the display (See
DISPLAY
■BO
350
Figure 1
:3G31S'
Figure 2
■30 3 ” i 5 U
Figure 3
30 m
Figure 4
m m
Figure 5
30HgS
START
m
Figure 6
Note: During the first rise of temperature, the convection fan will be activated to allow the oven to reach its target temperature
faster.
14