Kenmore 790. 4789 - Manual (Page 12)

Consumer Defined Control Features
Setting Temperature Display — Fahrenheit or Celsius:
The BROIL (BroiO and FLEX CLEAN (a^) P^ds control the Fahrenheit or Celsius temperature display modes. The
oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the
factory to display in Fahrenheit.
INSTRUCTIONS PRESS DISPLAY
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1
.
2
.
3.
To tell if the display is set for Fahrenheit or Celsius press
(Broil^i (Figure 1) and hold for? seconds;"—" will appearand
"BROIL" will flash in the display and a beep will sound. If "F"
appears, the display is set to show temperatures in Fahrenheit
(Figure 2). If "C" appears, the display is set to show
temperatures in Celsius (Figure 3).
Press to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (Figure 2) or "C"
(Figure 3).
Broil
for 7seconds
Press
change.
to accept the change or press to reject the
Figure 3
START 5 or ( stop
12